Direct probe contact to board-to-board connectors.
This eliminates the need for periodic replacement of the dummy connector due to the limited number of repetitive connection tests on the actual device.
A wire probe is used to make contact with
the metal terminal inside the connector.
The probe pitch is 0.35 mm, and the metal terminal width is 0.2 mm.
A wire probe is used to make contact with the metal terminal inside the board-to-board connector.
Conventional connector-to-connector insertion/removal tests have limits on the number of times connectors can be inserted and removed, but the use of wire probes to make contact reduces the number of times maintenance is required and improves the efficiency of the inspection process.
Specifications
Manufacturing example (Size and weight will vary depending on specifications.)
Product name
Flexible printed circuit test jig
Type
FPC (flexible printed circuit board)
Size
400 × 345 × 270 mm
Weight
15 kg
Applications
Probing of board-to-board connectors in FPC boards and electrical testing with USB-C terminal connectors.
Flexible printed circuit board test jig using a hand press.
Wire probe units can be mixed.
Proposals for insertion and removal structures for various USB terminals.
Inspection can be performed by probing from above or by inserting connectors from the side.
Insertion into the board being tested by using a floating mechanism.
This reduces damage to the board being tested during insertion for improved inspection efficiency.
